Terrafirma & Ferodo Brake Pads
Brake pads convert the kinetic energy of the car to thermal energy by friction. Two brake pads are contained in the brake caliper with their friction surfaces facing the rotor. When the brakes are hydraulically applied, the caliper clamps or squeezes the two pads together into the spinning rotor to slow/stop the vehicle. When a brake pad is heated by contact with a rotor, it transfers small amounts of friction material to the disc, turning it dull gray. The brake pad and disc (both now with friction material), then "stick" to each other, providing the friction that stops the vehicle.
In disc brake applications, there are usually two brake pads per disc rotor, held in place and actuated by a caliper affixed to a wheel hub or suspension upright. Depending on the properties of the material, disc wear rates may vary. The brake pads must usually be replaced regularly (depending on pad material), and most are equipped with a method of alerting the driver when this needs to take place. Some have a thin piece of soft metal that causes the brakes to squeal when the pads are too thin, while others have a soft metal tab embedded in the pad material that closes an electric circuit and lights a warning light when the brake pad gets thin. Later model Land Rover and Range Rover’s may use an electronic sensor to warn you of pad depth getting low.
Terrafirma offers the choice of our own Terrafirma replacment brake pads or the Ferodo option.
offers the choice of our own Terrafirma replacment brake pads or the Ferodo option.
Ferodo Premier brake pads are one of the aftermarket’s favourite names, bringing you safe, reliable braking – every time you need it.
As the choice of leading vehicle manufacturers, our brake pads deliver top-of-the-range original equipment (OE) quality and expertise.