Rear shock mounts and twin shock mount kits

TF512 Lowered rear top shock mounts

It is possible to gain and additional 2"(50mm) of rear suspension drop out with replacement lowered rear top shock mounts. Attaching the shock lower on the chassis allows greater axle articulation. Lowering your shocks can reduce the amount of upward or compression movement and may require the fitment of bump stop spacers TF515 and/or extended bump stops GAL146R or GAL147R.

TF518 Rear top shock mount re-locators

This is an alternative kit to TF512 allowing the original rear top shock mount to be bolted 2"(50mm) lower on the chassis. The mounting bracket is lowered to give greater axle articulation. Attaching the shock lower on the chassis allows greater axle articulation. Lowering your shocks can reduce the amount of upward or compression movement and may require the fitment of bump stop spacers TF515 and/or extended bump stops GAL146R or GAL147R.

TF519 Extreme long travel rear top shock mounts

Terrafirma TF122LT and TF403 +5” (125mm) longer shocks have pin top mounts instead of the conventional ring, this is to allow unrestricted articulation and movement of the mounting point on these extreme travel shocks. To allow these shocks to be fitted these unique rear top shock mounts that can be bolted to the original mounting points are required. It is possible that bump stop spacers TF515 and/or extended bump stops GAL146R or GAL147R will be required to prevent the shocks from bottoming out on full compression.

TF513 Rear twin shock mount kit

Heavily laden expedition vehicles and fast off road vehicles benefit from fitting twin shocks as it reduces stress and heat build up within the shock absorbers allowing them to perform better for longer. The Terrafirma rear twin shock mount kit allows 2 shocks to run parallel using existing mounting points. Suitable for all Terrafirma shocks except Big Bore Expedition shocks and +5” longer shocks. Care must be taken to make sure the lower shock mounting bracket does not interfere with the inner edge of the rear wheels. TF301 wheel spacers may be required.

TF514 Front twin shock mount kit

As with TF513 heavy expedition vehicles and fast off road vehicles will benefit from fitting twin shocks as it reduces stress and heat build up within the shock absorbers allowing them to perform better for longer. The Terrafirma front twin shock mount kit allows 4 shocks to be fitted to handle the punishment driving at speed over rough terrain. Suitable for all Terrafirma shocks except Big Bore Expedition shocks. Some trimming is required to fit this kit to Discovery 1 and Range Rover Classics.

Sort By:
Show:
Display: List Grid